Some AP's have been upgraded with 9.5 Firmware and with this firmware, you can deny registration from SM's with firmware lower than 9.5 by enabling "Only Allow Subscribers with Version 9.5 and Above"
In this tutorial we will be using the 9.0 DES firmware (you can use any firmware capable of ESN cloning)
1. set LAN to static in the range of your SM IP. (optional)
2. if you're on 9.5 firmware then skip this step, else you have to update you're firmware with CNUT using firmware other than 9.0 since CNUT
will not FTP the required files if it detected the current package is the same as the current firmware.
3. after updating with 9.5 using CNUT you have to update again with 9.0 using CNUT or via CLI, while updating you have look for the CNUT message Message:Programming then unplug your LAN cable to abort the flashing and let CNUT abort itself.
2. if you're on 9.5 firmware then skip this step, else you have to update you're firmware with CNUT using firmware other than 9.0 since CNUT
will not FTP the required files if it detected the current package is the same as the current firmware.
3. after updating with 9.5 using CNUT you have to update again with 9.0 using CNUT or via CLI, while updating you have look for the CNUT message Message:Programming then unplug your LAN cable to abort the flashing and let CNUT abort itself.
Note: do not worry about corrupting since it's still updating the Alternate Boot image.
Via CNUT
Via CNUT
Via Command Line Interface
4. put back your LAN cable and FTP your Canopy SM using any FTP software (Filezilla) and look for smboot.bin for imageType=MPC860:P7/P8/P9 SM, boot.image for imageType=SAL,SALSM:P10 SM or cxx_fskboot.image for imageType=Cxx_FSK:P11 SM
drag the file to your desktop and let FTP window open
5. Open smboot.bin using any Hex Editor (using XVI32 for ths image) and find the string SVM and you can see the version number here and edit it from 9.0 to 9.5
Note: Editing version will bypass the "Only allow Subscribers with Version 9.5 or Above" but cannot avoid to be updated if AP is auto update enabled since AUTO UPDATE will check the time and date of the firmware.
to bypass being auto updated by the AP you need to hex the SVT time (optional) and SVD date to SVT;18:56/SVD;09/29/2010 or 2011.
6. after editing Drag back the file to the open FTP window
7. Open Cmd prompt and telnet your canopy and issue "Burnflash" command and wait till it's done
then do a reset.
then do a reset.
8. Enjoy
13 comments:
big thanx d2 master a.it really helps
thank you po..
ask lang pano po ma edit ung canopy boot version. di ko kasi makita san banda.. thankx
cnu pwede makapagpagana ng canopy ko galing sa brkda ko bngay lang sm5760 txt nyo ako 09498681457 qc area willing to pay!
salamat Master Assasin...mwaaaah!!!
Thanks po dito ng marami bossing!
Saludo! Kampai!
m@ster Assasin ask ko lang po kung pwede ba tong gawen sa 8.1.5..salamat sa detalye ng 9.5 update trick..
Sir A dipo working sa P11 c25e ang trick na to tested ko na po ginawa ko na lahat ang trick pero no luck... tanging paraan disable autoupdate via CNUT.
Additonal info kahit pala hex edit mga boot file ng mga ibat ibang board type dika na aauto update pro auto restart naman ang LAN and pag enable ang "Only allow Subscribers with Version 9.5 or Above" dika na rin makakapag register sa AP tested ko na rin all board type. Im not sure kung lahat ng AP ganito baka dito lang sa area ko.
pag enable ang "Only allow Subscribers with Version 9.5 or Above" d gumagana sa p11 c25e. na confirm ko po. buti n lang d pa nila enable. letche napalitan din ung password ng AP nakahalata ata na kinakalikot ko settings. I hope may magaling na hacker dyan na magbibigay ng solution sa problema. There are two ways cguro. 1: isang program na malalaman password ng AP 2: Cloning pa rin ng SM kaso mabypass nya ung enable XXXXXX. hayzzz
di parin mabypass ng edited boot file pag naka enable ang "Only allow Subscribers with Version 9.5 or Above"
master A.d po makapagregister sa ap.sinunod ko yung instructions mo.always lng po scanning ang nangyayari kapag naka enable ang 9.5.
saakin din boss A.d po makaka-registered sa mga AP ko po dito sa lugar ko po boss A. kasi enable 9.5 AP-DES na itong mga AP ko po dito sa lugar ko po boss A.
not working 2014 na
Post a Comment